VoltShield Electrical Insulating Switchboard Matting
Need a formal quotation?
Choose your preferred size or colour, then send us your quantity, delivery address and any custom requirements.
We will confirm pricing, availability and delivery costs by email.
- Standard 6 mm | 0.9 m wide | Per linear metre | Black
- Standard 6 mm | 1.2 m × 10 m full roll | Black
- Standard 6 mm | 1.2 m wide | Per linear metre | Black
- Standard 9 mm | 0.9 m × 10 m full roll | Black
- Standard 9 mm | 1.2 m × 10 m full roll | Black
- Standard 9 mm | 1.2 m wide | Per linear metre | Black
- BS EN 61111 Class 0 | 3 mm | 1 m × 10 m roll
- BS EN 61111 Class 0 | 3 mm | 1 m wide | Per linear metre
- BS EN 61111 Class 2 | 4 mm | 1 m × 10 m roll
- BS EN 61111 Class 2 | 4 mm | 1 m wide | Per linear metre
- BS EN 61111 Class 4 | 5 mm | 1 m × 10 m roll
- BS EN 61111 Class 4 | 5 mm | 1 m wide | Per linear metre
- BS EN 61111 Class 0 | 3 mm | 1.2 m × 10 m roll
- BS EN 61111 Class 0 | 3 mm | 1.2 m wide | Per linear metre
- VDE-tested | 4.5 mm | 1 m × 10 m roll | Grey
- VDE-tested | 4.5 mm | 1 m wide | Per linear metre | Grey
VoltShield Electrical Insulating Switchboard Matting is specialist rubber safety matting for use in front of electrical switchboards, control panels and electrical equipment. It provides an electrically insulating standing surface in dry indoor work areas, with a fine-ribbed finish that helps improve underfoot grip.
Choose from standard insulating rubber matting, BS EN 61111:2009-rated Class 0, Class 2 and Class 4 options, and a separate VDE-tested version. Each version has its own performance specifications. Select the correct variant based on the operating voltage, site safety requirements and applicable standards.
Key Benefits
- Purpose-designed electrical insulating matting for switchboards and electrical work areas
- Fine-fluted ribbed rubber surface for improved grip
- Available in practical linear-metre lengths or full rolls
- Choice of thicknesses, widths and tested safety classifications
- Loose-lay installation for suitable dry indoor environments
Types and Electrical Ratings
- Standard insulation matting: 6 mm and 9 mm black options. The 6 mm version is withstand-tested to 11 kV; the 9 mm version to 15 kV. These are test values, not stated safe working voltages.
- BS EN 61111 Class 0: 3 mm; rated working voltage up to 1 kV, withstand tested to 10 kV.
- BS EN 61111 Class 2: 4 mm; rated working voltage up to 17 kV, withstand tested to 30 kV.
- BS EN 61111 Class 4: 5 mm; rated working voltage up to 36 kV, withstand tested to 50 kV.
- VDE-tested version: 4.5 mm grey rubber, tested to 50 kV under the applicable electrical test method. This test voltage must not be treated as the permitted working voltage.
Recommended Applications
Electrical switchrooms, substations, maintenance bays, distribution boards, control panels and other indoor workplaces where appropriately rated electrical insulating floor matting is required.
Product Information
- Material: Rubber; material formulation varies by version
- Surface: Fine ribbed/fluted texture
- Colour: Standard black; VDE version grey
- Thickness options: 3 mm, 4 mm, 4.5 mm, 5 mm, 6 mm and 9 mm
- Widths: Refer to the selected variant, including 0.9 m, 1 m and 1.2 m
- Supplied as: Full rolls or per linear metre, as specified in the selected option
- Installation: Loose lay in suitable dry indoor areas
Important Safety Information
Electrical safety ratings vary by variant. The appropriate class, voltage rating, inspection routine and use must be confirmed by a competent electrical safety professional. The stated dielectric test voltage is not necessarily the maximum permitted working voltage. Electrical insulating matting is an additional protective measure and does not replace safe isolation procedures or other required protective equipment.
Need a Quote?
Contact Mats4Africa with the required voltage classification, width, length and installation environment. We can assist with product selection and a quotation for supply and delivery across South Africa and Africa.